HVAC in Palm Beach County, Florida
Cooling and humidity dominate HVAC in Palm Beach County. Equipment near the beach also deals with salt air. Sizing and condensate drainage matter as much as the brand on the condenser.

Palm Beach County
Palm Beach County runs from the Atlantic beaches through the Intracoastal cities and out to inland communities such as Wellington. It is not part of the High Velocity Hurricane Zone. That zone is Miami-Dade and Broward only. Houses here still face hurricanes, and many addresses are in a wind-borne debris region.
A straight equipment change and a job that replaces ducts are different prices. Angi publishes a national band for each. Neither is a Palm Beach quote.
The federal heat pump credit is closed for equipment placed in service after December 31, 2025. Get the price without that credit.
How the cities in this county differ
Equipment within a few blocks of the ocean in Boca Raton, Delray Beach, and Jupiter sees salt air that inland condensers in Wellington do not. The cooling load is still long and humid everywhere in the county. Coastal houses should also be checked on the flood map before a new air handler is set on a slab.
West Palm Beach
West Palm Beach is the county seat on the mainland side of the Lake Worth Lagoon. The barrier island across the water is the Town of Palm Beach, which has its own building department. Do not mix the two addresses.
Downtown, Flamingo Park, Grandview Heights, and the neighborhoods along the lagoon do not share one house type. Some streets have local historic review for exterior changes.
Boca Raton
Boca Raton stretches from a coastal barrier and the Intracoastal to master-planned areas west of the Turnpike. East of U.S. 1 is a different wind and flood exposure from the western neighborhoods.
Many western communities have association rules for exterior colors, window frames, and roof materials. Those rules are private. They do not replace the building permit.
Delray Beach
Delray Beach includes a beach, the Intracoastal, and inland neighborhoods west of I-95. Atlantic Avenue is not the whole city, and the beach blocks are not the same permit problem as a house west of Congress.
Some downtown and beach streets sit in local historic districts. Exterior window changes there can need a second review besides the building permit.
Boynton Beach
Boynton Beach has an ocean side, an Intracoastal side, and a large inland side. The city permits addresses inside the city limits.
Older houses closer to the water and newer subdivisions farther west will not have the same opening sizes or the same flood exposure.
Jupiter
Jupiter sits at the county's north end, around the inlet and the Loxahatchee River, with beaches, marinas, and gated communities farther in.
You will see older river houses and newer planned neighborhoods in the same ZIP code area. The permit address still controls the wind design.
Wellington
Wellington is inland, west of the coastal cities, with equestrian properties and master-planned neighborhoods. It is not a beach town, and it is not in the High Velocity Hurricane Zone.
Association boards are common. They can limit frame color and roof style. They cannot waive the Florida Building Code.
Signs the system is done
Weak airflow, a system that runs all afternoon and never catches up, ice on the line, water around the air handler, and a condenser that trips its breaker are reasons to have it diagnosed. Age alone is not a diagnosis. A dirty coil, a failed capacitor, or a crushed duct can imitate a dead compressor.
Heat pump, central air, and SEER2

A central air conditioner cools. It needs a separate heat source, often a furnace or electric strips. A heat pump cools and heats by moving heat. In a hot climate the cooling rating matters most. In a cold climate the heating rating, HSPF2, matters too, and a cold-climate heat pump is a different specification from a Florida heat pump.
The Department of Energy's 2023 standards FAQ says split-system air conditioners manufactured on or after January 1, 2023 have to meet 13.4 SEER2 nationwide, and split-system heat pumps have to meet 14.3 SEER2 and 7.5 HSPF2. Southeast and Southwest states, including Florida, Georgia, North Carolina, Texas, Arizona, and California, also apply a higher regional standard to split-system air conditioners at installation. SEER2 is a new test. Do not treat it as the same number as an older SEER sticker. ENERGY STAR's split-system heat pump criteria are at least 15.2 SEER2, 11.0 EER2, and 7.8 HSPF2.
Match the indoor coil or air handler to the outdoor unit. A new condenser on an old mismatched coil often will not deliver the SEER2 on the sticker. Duct leaks and a bad return can waste the new equipment. Ask for a load calculation. Square footage alone is not one.
Permits and inspections
Palm Beach County permits unincorporated addresses. Cities and towns permit their own. A statewide product approval is not automatically enough: the county building division says the installation has to match the approval's limitations of use and the job site's design wind speed and exposure.
Florida license records are public through the Department of Business and Professional Regulation. Look up the license before you pay a deposit. A city may also require local registration. The state record does not say whether the company is careful or available.
Look up the address on the FEMA Flood Map Service Center before you change the structure, a water heater location, or electrical equipment. This site does not assign a flood zone.
Published cost ranges
Angi's 2026 HVAC replacement guide says most homeowners spend $5,000 to $12,500, with a national average of $7,500. The same guide says a job with new ducts and extras can reach $22,000, lists central air at $3,900 to $7,900, and lists one heat pump band at $4,200 to $7,600. A separate 2026 Angi heat pump guide says most homeowners pay $4,236 to $7,942, with an average of $6,087. The two guides do not match to the dollar, so we cite both and do not invent a blend.
We do not publish a city or county average. Doing that without a public local source would be a guess.
What the schedule is made of
A hvac job usually runs measure, product choice, permit, order, install, then inspection. The long part is often the permit review and the factory lead time, not the day of installation. This page does not print a number of weeks, because lead times and building departments differ and a made-up range would be a guess.
Credits and programs
The IRS says the Energy Efficient Home Improvement Credit is not allowed for property placed in service after December 31, 2025. Through that date the credit was 30 percent, with annual caps that included $600 for windows and skylights and $2,000 for heat pumps. Those caps are history, not a 2026 discount. The Residential Clean Energy Credit is not allowed for expenditures made after December 31, 2025. The IRS treats that expenditure as made when the original installation is completed, so a 2025 deposit does not keep the credit for a system finished in 2026. This is a reading of IRS pages, not tax advice.
How to compare companies
Florida license records are public at the Department of Business and Professional Regulation. Look up the license before you pay a deposit. A city may also require a local registration. The state record does not tell you whether the person is available or careful.
A useful quote names the product or equipment model, what is torn out, who pulls the permit, what is excluded, and the payment schedule. A deposit can be reasonable. Paying the entire job before any work starts is a risk you do not have to take. Get two quotes against the same scope and see which assumptions differ.
- The license number, and the name it is issued to.
- Who pulls the permit, and in whose name.
- What happens if hidden damage shows up.
- The warranty on the product and the warranty on the labor, as two separate lines.
After the work
Change filters, keep the condensate drain clear, and hose the outdoor coil when it is packed with dirt. A humid climate punishes a clogged drain. That maintenance does not replace a load calculation when the equipment is being changed.
Questions
Who permits hvac work in Palm Beach County?
Palm Beach County permits unincorporated addresses. Cities and towns permit their own. A statewide product approval is not automatically enough: the county building division says the installation has to match the approval's limitations of use and the job site's design wind speed and exposure.
Repair or replace hvac in Palm Beach County?
Repair when the failure is local and the rest of the system is sound. Replace when the material itself has failed across the house or the permit requires a different product than the one you have.
Sources
- Palm Beach County Building Division, product approval postings As of November 21, 2026.
- Angi, How Much Does HVAC Replacement Cost? (2026 data) As of November 21, 2026.
- Angi, How Much Does a Heat Pump Cost? (2026 data) As of November 21, 2026.
- IRS, Energy Efficient Home Improvement Credit As of November 21, 2026.
- IRS, FAQs on changes to sections 25C and 25D under Public Law 119-21 (July 4, 2025) As of November 21, 2026.
- U.S. Department of Energy, 2023 central air conditioner and heat pump standards FAQ As of November 21, 2026.
- ENERGY STAR, heat pump key product criteria As of November 21, 2026.
- FEMA Flood Map Service Center As of November 21, 2026.
- Florida DBPR license lookup As of November 21, 2026.
- Florida Building Commission, code edition notice As of November 21, 2026.