Plumbing
The published national cost range used here is for water heater replacement. A clogged drain, a sewer line, and a whole-house repipe are different jobs, and this guide does not invent prices for them.
What the job includes
Plumbing work runs from a single fixture to a water heater, a sewer line, or a whole-house repipe. Those are different jobs. We cite a public cost range only for water heater replacement, because that is the range we could source. We leave repipe and sewer prices off the page rather than invent them.
In a mapped flood zone, a water heater replacement can also be a flood-elevation question. Look up the address before you assume the new tank can sit where the old one sat.
- Water heater replacement
- Leaks, drains, and fixtures
- When a permit is likely
- Flood elevation as a separate question from the plumber's price
Signs you need a plumber
A water heater that no longer makes hot water, rust-colored water, a puddle under the tank, a drain that backs up in more than one fixture, or a supply line that will not shut off are the usual reasons. A single slow lavatory is often a clog. Two fixtures backing up together points at the building drain.
Tank and tankless water heaters
A tank stores hot water and runs out. A tankless unit heats water as it flows and needs enough gas or electrical capacity, plus a larger installation. Angi's 2026 guide puts most tank-style replacements at $881 to $1,826, with a national average of $1,349, and tankless replacement at $1,400 to $3,900. The same guide lists plumber labor at $45 to $200 per hour. Those are national figures, not a local quote.
In a mapped flood zone, the new heater may have to sit above the required flood elevation even if the old one sat on the floor. Ask the building department before the plumber sets the unit.
Repair or replace
Replace a thermocouple, an anode, a heating element, or a drain valve when the tank itself is not leaking. Replace the heater when the tank leaks. A leaking tank is not a repair. Whole-house repipes and sewer replacements are separate projects. This site does not cite a price for them because a public national range was not used.
Published cost ranges
Angi's 2026 water heater guide says most homeowners pay $881 to $1,826, with a national average of $1,349. Tankless replacement in that guide is $1,400 to $3,900. It lists plumber labor at $45 to $200 per hour. We do not cite a repipe or sewer-line range because we did not take one from a public source.
National guides mix climates and products. Use them to see scale, then compare written scopes.
What the schedule is made of
A plumbing job usually runs measure, product choice, permit, order, install, then inspection. The long part is often the permit review and the factory lead time, not the day of installation. This page does not print a number of weeks, because lead times and building departments differ and a made-up range would be a guess.
Credits and programs
How to compare companies
Florida license records are public at the Department of Business and Professional Regulation. Look up the license before you pay a deposit. A city may also require a local registration. The state record does not tell you whether the person is available or careful.
A useful quote names the product or equipment model, what is torn out, who pulls the permit, what is excluded, and the payment schedule. A deposit can be reasonable. Paying the entire job before any work starts is a risk you do not have to take. Get two quotes against the same scope and see which assumptions differ.
- The license number, and the name it is issued to.
- Who pulls the permit, and in whose name.
- What happens if hidden damage shows up.
- The warranty on the product and the warranty on the labor, as two separate lines.
After the work
Know where the main shutoff is before you need it. Flush a tank heater on the schedule the manufacturer prints. A tankless unit needs its inlet screen and, in hard-water areas, the descaling the manual describes.
Local pages
Florida pages go down to the county for Palm Beach, Broward, and Miami-Dade, and those county pages compare the cities. Texas, California, Arizona, North Carolina, Georgia, and Pennsylvania have state pages. A city address that used to have its own URL now opens the county page, which is where the permit and wind differences are written out.
Questions
Do you publish a price for a whole-house repipe?
No. We did not find a public source we were willing to cite for a national repipe range, so the page does not guess one.
Is a leaking tank an emergency?
A tank that is leaking onto the floor should be shut off and replaced. A unit that simply runs out of hot water can wait for a scheduled replacement.
Sources
- Angi, How Much Does Water Heater Replacement Cost? (2026 data) As of November 21, 2026.
- FEMA Flood Map Service Center As of November 21, 2026.
- Florida DBPR license lookup As of November 21, 2026.
- Florida Building Commission, code edition notice As of November 21, 2026.
Related pages
- PlumbingThe hub page for this service.
- Plumbing cost guideNational ranges with sources.
- How to choose plumbingQuestions to ask before you hire.
- Plumbing in FloridaStatewide code and program notes.
- Plumbing in Palm Beach CountyWind-borne debris is decided by address.
- Plumbing in Broward CountyHigh Velocity Hurricane Zone.
- Plumbing in Miami-Dade CountyHigh Velocity Hurricane Zone.