Skip to content
HomePatch Home Services
Menu

Windows and doors in Miami-Dade County, Florida

Impact windows in Miami-Dade are an HVHZ product-approval job. A Notice of Acceptance, or a Florida product approval that is listed for HVHZ use, is what the permit reviewer looks for. The city name on the address does not take the house out of the zone.

A brick and siding house with a shingle roof, a columned porch, and palms in the front yard.
Photo from Pexels. Source. Pexels License. Commercial use allowed.

Miami-Dade County

Miami-Dade County is the other half of Florida's High Velocity Hurricane Zone, with Broward. The county's product-control system, the Notice of Acceptance, is the strict local approval for windows, doors, shutters, roofing, and other envelope products.

Miami-Dade describes the Notice of Acceptance as the document that shows a product was reviewed against the Florida Building Code, including the High Velocity Hurricane Zone. The approval has an expiration date, a drawing, a missile rating, and size limits. An expired NOA or a drawing for a smaller window does not cover your opening.

Large missile protection applies to glazed openings within 30 feet of grade in the wind-borne debris rules published in the Commission's code materials. Most house windows are in that band. Protection can be the glass itself or an approved covering.

My Safe Florida Home may offset part of the cost for eligible older homesteaded homes, up to a $10,000 state share, when the inspection recommends opening protection and the legislature has funded the program. It is not automatic and it is not a coupon at the window company.

How the cities in this county differ

The City of Miami is not Miami-Dade County. The city permits addresses inside the city. Unincorporated neighborhoods are permitted by the county. Both are in the High Velocity Hurricane Zone, and both look for a current Notice of Acceptance or a Florida approval marked for HVHZ use.

Miami Beach is a barrier island. Many streets are also in local historic districts, so a window can pass product control and still fail preservation review for the frame profile. Coral Gables reviews many exterior changes for design on top of the HVHZ permit. Hialeah is inland, with smaller lots and older openings. The approval's size chart still has to match the opening you have. Homestead was heavily damaged by Hurricane Andrew in 1992. Houses built after that storm were built under a stronger code than houses that were only repaired. Doral is newer and inland, often with association rules on frame color, and it is still HVHZ.

Miami

The City of Miami is not the same thing as Miami-Dade County. The city permits addresses inside the city. Unincorporated neighborhoods around it are permitted by the county.

Brickell and the bay, the Miami River, and inland neighborhoods do not share one flood zone. Some streets also have historic review.

Impact windows in the City of Miami are HVHZ windows. Look for a current Miami-Dade Notice of Acceptance or a Florida approval marked for HVHZ use, then permit it with the city.

Miami Beach

Miami Beach is a barrier island. Wind and flood are both part of the address. The city is inside the HVHZ, and many streets are also in local historic districts.

Art Deco and other historic districts can require preservation review for exterior windows and doors. That review is in addition to the building permit and the product approval.

Impact windows in Miami Beach have to satisfy HVHZ product approval and, on some streets, the historic board. A compliant impact window can still be rejected if the frame and profile do not meet the district rules.

Hialeah

Hialeah is inland northwest Miami-Dade. Distance from the beach does not remove the High Velocity Hurricane Zone.

Lots are often smaller and the housing is older than in the western suburbs. Opening sizes and the condition of the existing buck matter.

Impact windows in Hialeah are still an HVHZ permit with the city. Check the approval's size chart against the opening, not against a model unit.

Coral Gables

Coral Gables is inland of the barrier islands and still inside the HVHZ. The city reviews many exterior changes for design, separate from the structural permit.

Mediterranean-style houses and local historic properties can limit the look of a new frame, grille, or door. Ask before you order a white vinyl unit for a street that will not accept it.

Impact windows in Coral Gables need HVHZ approval and may also need design review. Budget time for both. One does not cancel the other.

Homestead

Homestead is in southern Miami-Dade, closer to open country and to storms that come ashore from the south. It is inside the HVHZ.

Hurricane Andrew in 1992 damaged the area heavily. Houses built after that storm were built under a stronger South Florida code than houses that were only repaired.

Impact windows in Homestead follow Miami-Dade product control. If the house is older than the post-Andrew code, assume the openings need a real approval, not a like-for-like swap of the old glass.

Doral

Doral is inland west Miami-Dade, with newer planned communities. It is not on the coast, and it is in the High Velocity Hurricane Zone.

Association rules on window frames and roof tile are common. They are not a substitute for the city permit or for a Notice of Acceptance.

Impact windows in Doral are an HVHZ city permit. Confirm the product is approved for HVHZ use and that the association will accept the frame color you specified.

Signs the opening needs work

Look for fog between panes, a sash that will not stay up or lock, rot or soft wood at the sill, water stains under the window, and daylight around the frame. A window that is merely old is not automatically a replacement. A window that leaks wind-driven rain, or that cannot meet the opening-protection rule for that address, is.

Impact glass, shutters, and frame materials

Single-story houses with metal roofs along a canal, with palm trees nearby.
Photo from Pexels. Source. Pexels License. Commercial use allowed.
Impact glass and a shutter protect the opening in different waysImpact glass stays in the frameA shutter has to be closed
Illustration of the idea. The product still has to be approved for the address.

Impact glass is laminated so the pane stays in the frame after a strike. A shutter is a separate cover. Both can satisfy a wind-borne debris rule if the product is approved for that opening and, for a shutter, someone actually closes it before the storm. A shutter stored in a closet does not protect the house.

Vinyl is the common lower-cost frame. Aluminum is thinner and weaker as an insulator unless it has a thermal break. Wood looks right on some older houses and needs paint. Fiberglass and composite move less in heat. In a wind zone the frame has to be part of the same approval as the glass. A strong pane in an unapproved frame is not an approved opening.

An insert keeps the old frame and is faster when that frame is square and solid. A full-frame replacement removes the old frame and is the usual choice when the frame is rotten or the opening has to be anchored for an impact product.

Permits and inspections

Miami-Dade County permits unincorporated areas. Cities such as Miami, Miami Beach, Hialeah, Coral Gables, Homestead, and Doral permit addresses inside their limits. Product approval is a countywide envelope rule even when the city issues the permit.

Florida license records are public through the Department of Business and Professional Regulation. Look up the license before you pay a deposit. A city may also require local registration. The state record does not say whether the company is careful or available.

Look up the address on the FEMA Flood Map Service Center before you change the structure, a water heater location, or electrical equipment. This site does not assign a flood zone.

High Velocity Hurricane Zone

The High Velocity Hurricane Zone is Miami-Dade County and Broward County. Envelope products there need an approval that covers HVHZ use. Miami-Dade issues that approval as a Notice of Acceptance. A Florida product approval can also be used when the listing says it is approved for the HVHZ.

Florida Building Commission workshop materials describe a wind-borne debris region as areas within 1 mile of the coastal mean high water line where the ultimate design wind speed is 130 mph or greater, and areas where that wind speed is 140 mph or greater. Glazed openings in that region have to be impact resistant or protected. Openings within 30 feet of grade are tied to the large missile test. Confirm the code edition on the permit. The Commission lists the 8th Edition (2023) as effective December 31, 2023, and its workplan sets the 9th Edition effective date at December 31, 2026.

Published cost ranges

Angi's 2026 window guide, read for this site on November 21, 2026, says most homeowners pay $3,436 to $11,836 for a replacement project. The national average in that guide is $7,347. Individual windows run $300 to $2,500, and the guide puts a typical window near $750. Those figures mix ordinary products. They are not an impact-window price and they are not a local quote.

We do not publish a city or county average. Doing that without a public local source would be a guess.

What the schedule is made of

A windows job usually runs measure, product choice, permit, order, install, then inspection. The long part is often the permit review and the factory lead time, not the day of installation. This page does not print a number of weeks, because lead times and building departments differ and a made-up range would be a guess.

Credits and programs

The IRS says the Energy Efficient Home Improvement Credit is not allowed for property placed in service after December 31, 2025. Through that date the credit was 30 percent, with annual caps that included $600 for windows and skylights and $2,000 for heat pumps. Those caps are history, not a 2026 discount. The Residential Clean Energy Credit is not allowed for expenditures made after December 31, 2025. The IRS treats that expenditure as made when the original installation is completed, so a 2025 deposit does not keep the credit for a system finished in 2026. This is a reading of IRS pages, not tax advice.

My Safe Florida Home is in Florida Statutes section 215.5586. It is not an entitlement and it depends on appropriation. The published 2026 statute requires a homesteaded, site-built, owner-occupied single-family home that is detached, or attached and not over three stories. A grant also requires an insured value of $700,000 or less, a build date before January 1, 2008, a program inspection in the prior 24 months, and low or moderate income as defined in section 420.0004. The usual match is $1 from the homeowner for $2 from the state, up to $10,000 from the state. Low-income applicants can receive up to $10,000 with no match. When an inspection recommends it, grants can cover opening protection and specific roof improvements. Approval has to come before construction. The Senate copy of the statute flags 2026 budget language and a possible July 1, 2027 revert. Check the statute and mysafeflhome.com before you count on the money.

Florida Statutes section 627.0629 tells residential insurers to file actuarially reasonable discounts, credits, or deductible reductions for wind mitigation, including opening protection and roof features. The Office of Insurance Regulation publishes the inspection form. The dollar amount depends on the insurer and the house. We do not print a percent off.

How to compare companies

Florida license records are public at the Department of Business and Professional Regulation. Look up the license before you pay a deposit. A city may also require a local registration. The state record does not tell you whether the person is available or careful.

A useful quote names the product or equipment model, what is torn out, who pulls the permit, what is excluded, and the payment schedule. A deposit can be reasonable. Paying the entire job before any work starts is a risk you do not have to take. Get two quotes against the same scope and see which assumptions differ.

  • The license number, and the name it is issued to.
  • Who pulls the permit, and in whose name.
  • What happens if hidden damage shows up.
  • The warranty on the product and the warranty on the labor, as two separate lines.

After the work

Wash tracks, check weep holes, and look at the caulk joint once a year. After a storm, look for a cracked lite or a shutter that no longer latches. Impact glass that is cracked still needs a replacement even if the laminate held.

Questions

Do I need impact windows in Miami-Dade County?

Yes for glazed openings on a typical house permit. Miami-Dade County is in the High Velocity Hurricane Zone. Use a product approved for HVHZ use, or an approved shutter, and permit it locally.

Who permits windows and doors work in Miami-Dade County?

Miami-Dade County permits unincorporated areas. Cities such as Miami, Miami Beach, Hialeah, Coral Gables, Homestead, and Doral permit addresses inside their limits. Product approval is a countywide envelope rule even when the city issues the permit.

Repair or replace windows and doors in Miami-Dade County?

Repair hardware and weatherstripping when the frame and glass are sound. Replace the unit when the glass is cloudy, the frame is soft, or the opening has to be impact-rated and the old window is not.

Sources

Related pages

Tell us about the project