Skip to content
HomePatch Home Services
Menu

Roofing in Palm Beach County, Florida

A Palm Beach County roof has to handle wind and sideways rain. The covering you see is only part of the permit. Underlayment, the deck, and roof-to-wall connections decide how the house behaves if the covering is damaged.

A brick and siding house with a shingle roof, a columned porch, and palms in the front yard.
Photo from Pexels. Source. Pexels License. Commercial use allowed.

Palm Beach County

Palm Beach County runs from the Atlantic beaches through the Intracoastal cities and out to inland communities such as Wellington. It is not part of the High Velocity Hurricane Zone. That zone is Miami-Dade and Broward only. Houses here still face hurricanes, and many addresses are in a wind-borne debris region.

Tile is common near the coast and asphalt shingles are common farther inland. Both still have to match the design wind speed for the address. An inland house is not a free pass to a lighter roof.

My Safe Florida Home can fund roof-to-wall connections, stronger roof-deck fastening, and secondary water resistance when an inspection recommends them. The program FAQ says a roof covering replacement is eligible when it is required to complete those improvements, and a covering swap by itself is not.

County permits cover unincorporated addresses. Boca Raton, West Palm Beach, Wellington, and the other cities run their own building departments.

How the cities in this county differ

Tile is common east of I-95. Asphalt is common farther west, including much of Wellington. Both still have to match the design wind speed for the lot. A western house is not a light-duty roof.

West Palm Beach, Boca Raton, Delray Beach, Boynton Beach, Jupiter, and Wellington each issue their own reroof permits. Historic streets in West Palm Beach and Delray Beach can add a design review for the covering you can see from the street. Association rules in Boca Raton and Wellington can limit tile color or metal. Those rules sit beside the code, not instead of it.

West Palm Beach

West Palm Beach is the county seat on the mainland side of the Lake Worth Lagoon. The barrier island across the water is the Town of Palm Beach, which has its own building department. Do not mix the two addresses.

Downtown, Flamingo Park, Grandview Heights, and the neighborhoods along the lagoon do not share one house type. Some streets have local historic review for exterior changes.

Boca Raton

Boca Raton stretches from a coastal barrier and the Intracoastal to master-planned areas west of the Turnpike. East of U.S. 1 is a different wind and flood exposure from the western neighborhoods.

Many western communities have association rules for exterior colors, window frames, and roof materials. Those rules are private. They do not replace the building permit.

Delray Beach

Delray Beach includes a beach, the Intracoastal, and inland neighborhoods west of I-95. Atlantic Avenue is not the whole city, and the beach blocks are not the same permit problem as a house west of Congress.

Some downtown and beach streets sit in local historic districts. Exterior window changes there can need a second review besides the building permit.

Boynton Beach

Boynton Beach has an ocean side, an Intracoastal side, and a large inland side. The city permits addresses inside the city limits.

Older houses closer to the water and newer subdivisions farther west will not have the same opening sizes or the same flood exposure.

Jupiter

Jupiter sits at the county's north end, around the inlet and the Loxahatchee River, with beaches, marinas, and gated communities farther in.

You will see older river houses and newer planned neighborhoods in the same ZIP code area. The permit address still controls the wind design.

Wellington

Wellington is inland, west of the coastal cities, with equestrian properties and master-planned neighborhoods. It is not a beach town, and it is not in the High Velocity Hurricane Zone.

Association boards are common. They can limit frame color and roof style. They cannot waive the Florida Building Code.

Signs the roof needs work

Look for missing or cupped shingles, cracked or slipped tile, granules in the gutters, daylight in the attic, stains on ceilings after wind-driven rain, and soft decking when you walk the roof. A stain can also be a flashing or a vent, so do not buy a whole roof because one ceiling spot is wet.

Shingle, metal, and tile

A brick and siding house with a shingle roof, a columned porch, and palms in the front yard.
Photo from Pexels. Source. Pexels License. Commercial use allowed.
Three common roof coveringsShinglesTile and metal
Illustration of coverings. The underlayment and the deck are not shown.

Asphalt shingles are the common covering and the one most national cost guides are built around. Architectural shingles are thicker than three-tab. Metal sheds water and is lighter. Tile, clay or concrete, is common on South Florida houses and costs more to install and to walk on. The covering is only the top layer. Underlayment, the deck, and how the roof holds onto the walls decide whether the house stays dry if the covering is damaged.

An overlay puts a new covering on top of the old one and skips the tear-off. It hides rotten decking. Many Florida permits expect a tear-off so the deck and the underlayment can be seen. Ask the building department before you accept an overlay.

Permits and inspections

Palm Beach County permits unincorporated addresses. Cities and towns permit their own. A statewide product approval is not automatically enough: the county building division says the installation has to match the approval's limitations of use and the job site's design wind speed and exposure.

Florida license records are public through the Department of Business and Professional Regulation. Look up the license before you pay a deposit. A city may also require local registration. The state record does not say whether the company is careful or available.

Look up the address on the FEMA Flood Map Service Center before you change the structure, a water heater location, or electrical equipment. This site does not assign a flood zone.

Wind-borne debris, not HVHZ

Florida Building Commission workshop materials describe a wind-borne debris region as areas within 1 mile of the coastal mean high water line where the ultimate design wind speed is 130 mph or greater, and areas where that wind speed is 140 mph or greater. Glazed openings in that region have to be impact resistant or protected. Openings within 30 feet of grade are tied to the large missile test. Confirm the code edition on the permit. The Commission lists the 8th Edition (2023) as effective December 31, 2023, and its workplan sets the 9th Edition effective date at December 31, 2026.

This county is outside the HVHZ. That does not mean a beach house can use a basic window. It means you confirm the wind speed instead of assuming the Miami-Dade product rule.

Published cost ranges

Angi's 2026 roof replacement guide says most homeowners pay $5,903 to $13,380, with a national average of $9,611. The same guide puts a typical job at $4 to $11 per square foot. Pitch, tear-off, and material move the total. This is not a South Florida tile price.

We do not publish a city or county average. Doing that without a public local source would be a guess.

What the schedule is made of

A roofing job usually runs measure, product choice, permit, order, install, then inspection. The long part is often the permit review and the factory lead time, not the day of installation. This page does not print a number of weeks, because lead times and building departments differ and a made-up range would be a guess.

Credits and programs

My Safe Florida Home is in Florida Statutes section 215.5586. It is not an entitlement and it depends on appropriation. The published 2026 statute requires a homesteaded, site-built, owner-occupied single-family home that is detached, or attached and not over three stories. A grant also requires an insured value of $700,000 or less, a build date before January 1, 2008, a program inspection in the prior 24 months, and low or moderate income as defined in section 420.0004. The usual match is $1 from the homeowner for $2 from the state, up to $10,000 from the state. Low-income applicants can receive up to $10,000 with no match. When an inspection recommends it, grants can cover opening protection and specific roof improvements. Approval has to come before construction. The Senate copy of the statute flags 2026 budget language and a possible July 1, 2027 revert. Check the statute and mysafeflhome.com before you count on the money.

The program FAQ says a roof covering replacement is eligible when it is needed to install roof-to-wall connections, stronger deck fastening, or secondary water resistance. A covering swap by itself is not eligible.

Florida Statutes section 627.0629 tells residential insurers to file actuarially reasonable discounts, credits, or deductible reductions for wind mitigation, including opening protection and roof features. The Office of Insurance Regulation publishes the inspection form. The dollar amount depends on the insurer and the house. We do not print a percent off.

How to compare companies

Florida license records are public at the Department of Business and Professional Regulation. Look up the license before you pay a deposit. A city may also require a local registration. The state record does not tell you whether the person is available or careful.

A useful quote names the product or equipment model, what is torn out, who pulls the permit, what is excluded, and the payment schedule. A deposit can be reasonable. Paying the entire job before any work starts is a risk you do not have to take. Get two quotes against the same scope and see which assumptions differ.

  • The license number, and the name it is issued to.
  • Who pulls the permit, and in whose name.
  • What happens if hidden damage shows up.
  • The warranty on the product and the warranty on the labor, as two separate lines.

After the work

Keep gutters and valleys clear. Look at pipe boots and flashing after a windstorm. Do not walk a tile roof unless you know how the tiles are set. A yearly look from the ground and from the attic catches more leaks than a sales visit.

Questions

Who permits roofing work in Palm Beach County?

Palm Beach County permits unincorporated addresses. Cities and towns permit their own. A statewide product approval is not automatically enough: the county building division says the installation has to match the approval's limitations of use and the job site's design wind speed and exposure.

Repair or replace roofing in Palm Beach County?

Repair when the failure is local and the rest of the system is sound. Replace when the material itself has failed across the house or the permit requires a different product than the one you have.

Sources

Related pages

Tell us about the project